Program for stream Industrial Production, Planning and Inventory Management

MB-29: Planning and Scheduling under Uncertainties
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Boualem Rabta

• Optimal Truck Scheduling of Air Freight using Collaborative Planning
  Berend Markhorst, Rob van der Mei, Elenna Dugundji
• Dynamic programming for the management of an oil production network under partial observation
  Cyrille Vessaire, Jean-Philippe Chancelier, Michel De Lara, Pierre Carpentier
• Analysis of stochastic manufacturing systems with unreliable operations
  Boualem Rabta

MC-29: Manufacturing I
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Manuel Gonzalez-De-la-Rosa

• ANN Meta-model based on Simulation for Estimating Production Rate in an Assembly Manufacturing System
  Dug Hee Moon, Ye Rin Seo, Dong Ok Kim, Yang Woo Shin, Chang Seong Ko
• Design of Reconfigurable Cellular Manufacturing Systems with Alternative Routing
  Mehmet Uzunosmanoglu, Veronique Limère, Birger Raa
• Minimum-Cost Selective Assembly
  Thomas Weber
• Sustainable inventory policy for items with backlogging and a power demand pattern considering a harmful gases emission tax
  Manuel Gonzalez-De-la-Rosa, Luis A. San-José-Nieto, Joaquin Sicilia-Rodriguez, Leopoldo Cárdenas-Barrón

MD-29: Manufacturing II
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Dennis Prak

• Temperature-based trajectory planning for surfaces in Wire-Arc Additive Manufacturing
  Johannes Schmidt, Armin Fügenschuh, Johannes Buhl
• A novel decomposition-based method for solving general-product structure assemble-to-order systems
  Mohsen Elhafsi, Jianxin Fang, essia Hamouda
• Timing intermittent demand with time-varying order-up-to levels
  Dennis Prak, Patricia Rogetzer
• Real-time optimization for a Digital Twin of a robotic cell with human operators
  Andrea Brocchi, Teresa Albini, Marco Pranzo, Gianluca Murgia

TA-29: Manufacturing III
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Joaquin Sicilia-Rodriguez

• The influence of responsiveness on the design and asset cost of a make-to-order multiproduct batch plant
  Amy Van Meir, Trijntje Cornelissens, Johan Springael
• An optimization model based on flexible lead times for semiconductor wafer fabrication
  Sungwon Hong, Younsoo Lee, Kyungsik Lee
• Optimal feature selection for new product development considering economies of scale
  Shaghayegh Ramezanpour Shalmani, Laurent Alfandari, Sara Rezaee Vessal
• Optimal production-inventory policy for products with time-dependent demand pattern and backlogged shortages
  Joaquin Sicilia-Rodriguez, Luis A. San-José-Nieto, Manuel Gonzalez-De-la-Rosa, Jaime Febles-Acosta

TB-29: Industry 4.0
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Francisco Maia

• A Data-driven Approach to Enhance Worker Productivity by Optimizing Facility Layout
  Mahdi Ghorashi Khalilabadi, Debjit Roy, René de Koster
• Hybrid Machine Learning/Simulation Approaches applied to Logistics Systems
  Francisco Maia

TC-29: Maintenance
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Halit Metehan Dilaver

• An enhanced Bayesian Condition-Based Maintenance policy for industrial equipment subject to non-exponential deterioration.
  Dimitris Kampitsis, Sofia Panagiotidou
• Data Driven Condition Based Maintenance
  Ruud Teunter
• Integrated Planning of Asset-Use and Dry-Docking for a Fleet of Maritime Assets
  Halit Metehan Dilaver, Alp Akcay, Geert-Jan van Houtum

TD-29: Complex Scheduling I
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Robert Moss

• A GRASP for a real-world scheduling problem with unrelated parallel print machines and sequence-dependent setup times
  Alberto Locatelli, Manuel Iori, Marco Locatelli
• The medical-radioisotope cyclic-scheduling production cost optimization
  Ron Weitzman, Inessa Ainbinder, Daniel Lifshitz, Gavriel David Pinto, Amiram Azarzar, Gad Rabinowitz, Eyal Mishani
• Dispatching Heterogeneous AGVs with Battery Constraints using Deep Reinforcement Learning
  Nitish Singh, Alp Akcay, Tugce Martagan, Ivo Adan
• Improving wafer fabrication plant KPIs through deployment of a multiobjective hybrid MILP scheduling model
  Robert Moss, SHARON FEELY, Laura McElhinney, Semya Elaoud, Martin Breslin

WA-29: Complex Scheduling II
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Ignacio Eguia

• Optimization strategies for Scheduling in Container Terminals
  Sameh Haneyah
• Automatic Dispatching Rule Generation for the Dynamic Flexible Job Shop Scheduling Problem via Genetic Programming
  Nuno Marques, Gonçalo Figueira, Luis Guimarães
• Distributional reinforcement learning for online optimization of chemical production schedules and supply chains
  Max Mowbray, Dongda Zhang, Antonio del Rio Chanona
• A MILP model for production planning in Additive Manufacturing with alternative part orientations
  Ignacio Eguia, Jose Carlos Molina, Jesus Racero, Sebastián Lozano

WB-29: Line Balancing
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): S. Ehsan Hashemi Petroodi

• Workload Smoothing and the Robustness of Assembly Line Balancing: A Simulation Analysis
  ONCU HAZIR, Maher Agi, Jeremy Guerin
• Robust optimization for mixed-model assembly line balancing with dynamic task assignment and walking workers
  S. Ehsan Hashemi Petroodi, Simon Thevenin, Sergey Kovalev, Alexandre Dolgui

WC-29: Integrated Problems
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Alexander Baumeister

• Integrated consideration of assembly line scheduling and line feeding
  Pirmin Fontaine, Daniel Müllerklein, Frederik Ostermeier
• Integrated Production Planning and Scheduling of the Steel-Production Processes Continuous Casting and Hot Rolling using Relax-and-Fix in a Rolling Horizon Procedure
  Alexander Lohr, Hubert Missbauer
• Tabu search method using disjunctive graph modeling for flexible job shop with transport resources
  Lucas BERTEROTTIERE, Claude Yugma, Stéphane DAUZERE-PERES
• Capacity-driven performance optimization of hybrid product configurations
  Alexander Baumeister

WD-29: Decomposition for Large Scale Inventory Applications
Stream: Industrial Production, Planning and Inventory Management
Room: M1 (building M-wing)
Chair(s): Stefan Minner

• An exact column generation algorithm for the lot-type design problem
  Jörg Rambau, Miriam Kießling, Sascha Kurz
• Strategic Inventory Placement in Large-Scale Multi-Echelon Networks: A Sampling-Based Approach
  Stefan Minner, Josef Svoboda
• Flow Formulation of the Stochastic Guaranteed Service Model with Demand Propagation
  Dominik Kamp, Jörg Rambau
• Inventory control in production-inventory systems with random yield and rework
  Danja R. Sonntag, Peter Berling